All-new DJI Phantom 4 Pro v2.0 with reduced aircraft noise and OcuSync video transmission system. Equipped with the same incredible 1-inch 20-megapixel sensor found on the Phantom 4 Pro.
The new Phantom 4 V2.0 features an OcuSync HD transmission system, which supports automated dual-frequency band switching and connects to DJI Goggles wirelessly. Like the Phantom 4 Pro and Advanced the Phantom 4 Pro v2.0 is equipped with a 1-inch 20-megapixel sensor, capable of shooting in 4K up to 60fps and Burst Mode stills at 14 fps. Plus it's Flight Autonomy system adds dual rear vision sensors and infrared sensing systems for a total of 5-direction of obstacle sensing and 4-direction of obstacle avoidance.
DJI Phantom 4 Pro v2.0 with Free Hardshell Backpack
The controller included with this Phantom 4 Pro does not have an in-built screen. That is the Phantom 4 Pro+.
30 min 4 dB 30m 7km 4k 60fps 5 directions
New aerodynamic 9455S propellers and new FOC ESC drivers offer improved noise control and sinusoidal current for increased stability. Aircraft noise has been reduced by up to 4dB* (60%) for quieter, more enjoyable flights.
A mechanical shutter is used to eliminate rolling shutter distortion, which can occur when taking images of fast-moving subjects or when flying at high speeds. Excellent optical performance, sensors, and processors ensure everything is captured with high dynamic range and more image detail needed for advanced post-production.
The 1-inch 20-megapixel CMOS sensor in the Phantom 4 Advanced is almost four times the size of the Phantom 4's 1/2.3in sensor. It uses larger pixels and has a maximum ISO of 12800 as well as increased contrast. It also features an aerial optimized F2.8 wide-angle lens with a 24 mm equivalent focal length. Images are consistently detailed with low distortion and dispersion, ensuring that photos and videos are sharp and vivid.
An enhanced video processing system allows video to be captured in cinema and production optimized DCI 4K/60 (4096 x 2160/60 fps) at a bitrate of 100 Mbps, enabling you to get high-resolution slow motion shots. The Phantom 4 Advanced also supports the H.265 video codec (maximum resolution 4096X2160/30 fps).
The Phantom 4 Pro V2.0 uses a mechanical shutter and a large-aperture prime lens. A mechanical shutter with a maximum speed of 1/2000s eliminates rolling shutter distortion which can occur when taking images of fast moving subjects, or when flying at high speeds. The electronic shutter has also been improved with a maximum shutter speed of 1/8000s. A new Burst Mode is capable of shooting 14 fps at 20-megapixels, all for catching the perfect moment.
5-Direction Obstacle Sensing
Flight Autonomy is expanded with an additional set of high-resolution stereo vision sensors placed at the rear of the craft, in addition to the pair placed at the front and infrared sensing systems placed on the sides. This network creates 5-direction of obstacle sensing as well as 4-direction of obstacle avoidance. This protects the Phantom 4 Pro from more obstacles and gives filmmakers the confidence to capture more complex images.
6-Camera Navigation System
Three sets of dual vision sensors form a 6-camera navigation system that works constantly to calculate the relative speed and distance between the aircraft and an object. Using this network of forward, rearward and downward vision sensors, the Phantom 4 Pro V2.0 is able to hover precisely in places without GPS when taking off indoors, or on balconies, or even when flying through windows with minimal pilot control. In the unlikely event that front and downward sensors are unable to operate, the aircraft can still hover in place using the rear stereo vision system. The Phantom 4 Pro V2.0 is also able to fly in complex environments at a flight speed of up to 31mph (50kph) while avoiding obstacles in its path. In Narrow Sensing Mode, the Phantom 4Pro narrows its sensing scope enabling it to see in more detail and fly through small spaces.
Infrared Sensing System
The Phantom 4 Pro V2.0 is the first DJI aircraft to use an infrared sensing system. Placed on the left and right sides of the aircraft, the sensors measure the distance between the aircraft and obstacles using infrared 3D scanning. When in Beginner and Tripod Mode, these sensors have a horizontal field of view of 70° and a vertical field of view of 20°, providing a wide view of the scene to the sides of the Phantom and a maximum range of 23ft (7m). Traditional ultrasonic sensors only have a detection range of 3-5m and may be confused when affected by propeller vibration. The infrared sensing system can sense larger areas and measure the distance between the aircraft, identifying the closest objects accurately while avoiding interference, providing more reliable sensing and protection.
30 min Flight Time
Max Speed of 72km/h
30m Sensor Range
7km Control Range
4k Video Resolution up to 60fps
20MP Camera Resolution
5 Direction Obstacle Sensing
4 dB Noise Reduction